{ cursor: url('LightningIconNew.ico') }

* THE ELECTRIC UNIVERSE *
(The Good Vibrations)
(Page 10)

(COPYRIGHTED)

Audiowriter / Sharpencil




*EDDY CURRENTS & ELECTRIC CURRENTS*

Electric Currents are created from the "compiling / conduction" of Eddy Currents
through the Protons (atoms) of a NON Magnetic but electrically conductive Mass.
(Copper for example).



*EDDY CURRENTS*

Eddy Currents are created when the Normal (Gravitational) Strong Force
energy delivery to NON Magnetic but electrically conductive Protons of Mass
are temporarily "linearly accelerated/aligned" / Magnetized.
An electric generator does this by rotating a Magnet (rotor) inside a ring
of Copper coils (stator).
The atoms / Protons of the Copper coils of the stator are NON magnetic -
and Normally receive their Strong Force energy delivery / supply from the
Universal Static Grid spherically/radial -
equally around the circumference and length of the wire itself at
Normal Gravitational Aether static charge "acceleration".
However - when the magnet (rotor) comes in close proximity
to the Copper coil (stator) -
this forces the atoms / Protons of the Copper Coil to be
"temporarily" magnetized = (higher acceleration in the Aether static charge
as the normal gravitational Law of Conservation of Energy is "linearly breached"
in a "relayed" or "conducted" delivery from Copper atom - to Copper atom
in sequential series through the Copper element itself.
Which forces the Strong Force energy delivery to the atoms / Protons
of the Copper coils be "temporarily aligned" (magnetized).
The particular Atomic structure of Copper Atoms -
(29 Protons and 29 simultaneous Electron Functions)
Is very similar to the Atomic structure of Ferrite (Magnetic) Atoms -
(26 Protons and 26 simultaneous Electron Functions)
Which is what allows the Copper to become so strongly -
but only "temporarily" - magnetized by a magnetic field.

Copper will become partially "submissive" to a Magnetic Field
when in its presence - but Copper will not display "COMPLETE"
submission - or "RETAIN" the Magnetic Field ("linear acceleration of gravity")
when the Magnetic Field is removed.

The Atoms / Protons of the Copper Coils are forced into having their
Strong Force energy "temporarily" delivered in an "aligned/linear acceleration"
(magnetic) direction.


NOTE-
The Aether static charge is also actually being proportionately "accelerated" into the Copper
Coil along its length and width
(acceleration of the normal gravitational spherically/radial penetration) -
Behind - Along With - and in Front of - the rotating Magnet - in circumferential "trajectory"
Strong Force energy delivery with the direction of rotation of motion of the Magnet.
Which this "normal gravitational spherically/radial accelerated penetration" of the
Aether static charge along the entire length and width - into the Copper Coil
(and any conductor connected to the Copper Coil)
which is what establishes the Magnetic Field around the Coil and any connected Conductor.
END NOTE

EXAMPLE
Imagine a water hose with a pressurized amount of clear water running through it.
Now, imagine there is a "T" connection somewhere in the hose
where there is a second hose connected to the "T" -
however - the other end of the second hose is in a container of Red colored water.
As the pressurized water flows through straight line trajectory of the "T" -
it will create a "suction" on the other hose connected to the perpendicular (90 degree opposition)
connection of the "T" - and the Red colored water will be "drawn / siphoned" into the
main pressurized "flow" of clear water - tinting it proportionately "Red".

This is the same principal occurring with the "linearly accelerated relay of gravity"
through a Copper Coil which is creating an "electric current" = (linearly accelerated gravity) -
or a conductor (Wire) which is energized with a "electric current" = (linearly accelerated gravity).
(IE - the act / motion of the linear acceleration itself -
(forced "linear acceleration" of gravity through the Copper) -
causes the surrounding static charge of the Aether to be
"pulled into the linear acceleration situation".)
Which the linear acceleration (IE = static suction) of penetration of the surrounding
Aether static charge into the Copper Coil - and any connected Conductor -
is what constitutes / displays the "Magnetic Field"
(angular acceleration in the Aether static charge - (gravity)
around and into an "Energized Conductor".)
END EXAMPLE


Below is a side view demonstration of a Magnet being rotated
(passing near) a stationary Copper Coil.
As / when - the magnet nears the right end of the Coil -
it forces the Protons/Atoms of the Copper to receive their
Strong Force Energy from the Aether in an "aligned" direction.
This causes the static charge in the Aether
(normal spherically/radial gravitational energy acceleration / delivery)
to "change" direction and speed as to HOW it is delivered
to the Protons/Atoms of the Copper.
The "gravitational" static charge is FORCED to become "relayed"
from one - to the next - to the next - Proton/Atom - through the
Copper instead of it being delivered "spherically/radial" at Normal Gravitational
"Speed / Time" and - "Direction" - of penetration.
(IE - the Copper is forced to accept its Strong Force Energy
delivery in an "aligned" (Magnetic) orientation - just as the Magnet does.)
As the magnet is moved along the Copper Coil - the Protons/Atoms
of the copper are forced to "draw in" (relay) the Strong Force static charge
from the Aether - in the direction of the moving magnet in a "linear relay" -
which causes the Aether static charge - directly surrounding the Copper
to also become "accelerated" as it "penetrates the Copper Coil -
which is what creates the Magnetic Field =
(linear / angled acceleration in the normal spherically/radial gravitational penetration)
that is "displayed / induced" around the Copper Coil.






Below is a side view demonstration of the normal gravitational Strong Force energy
delivery - from the Aether of static charge to the Protons of a Copper Coil -
With NO Magnetic Rotor present.



Below is a side view demonstration of the same situation as the above Magnetic Rotor -
However - the below demonstration shows only the
"Protons" and "Electron Functions" of the Copper Coil
when a rotating Magnet (Rotor) is in action.



Below is the same demonstration as above - only "faster".



It is the "movement" of the Strong Force static charge - in this "aligned/relayed" orientation
"through" the Copper Atoms - which IS what creates "Eddy Currents".
(IE - the Magnet is causing the static charge to be "jammed/shoved/passed" in succession
in a "linear accelerated relay" from Electron Function - to - Electron Function -
from Atom - to - Atom.
Which results with the "relayed" static charge being "pushed" ahead of the actual location
of the Magnet - which are "Eddy Currents".
Eddy Currents are the accelerated "pulses" of "gravity" that the Electron Functions of each individual
Proton "relays/passes" along the Protons/Atoms of the Copper.
The Atoms of the Copper "use" the NECESSARY portion of the "moving" static charge
(Eddy Currents) for their Strong Force "consumption" - which this is the "Law of Conservation of Energy".


NOTE
The Protons nearest the "center" of the "Energized Conductor" are receiving (substituting / stealing)
their Strong Force energy - proportionately "more" from the Eddy Currents
(Law of Conservation of Energy)
than are the Protons nearer to the outside circumference of the "Energized Conductor".
(IE - the Protons around the outer circumference of the Conductor are receiving a proportionate
majority of their Strong Force energy from the "Magnetic Field"
(surrounding accelerated "suctioned" Aether static charge)
However - the Protons nearer to the center of the wire (Mass) are displaying the proportionate
"parasitic" = "Law of Conservation of Energy" - from the Eddy Currents.
END NOTE

The "total" (excess) amount of accelerated Gravity "above / beyond" the
Law of Conservation of Energy -
are Eddy Currents - which is "ENERGY".

(If the magnet (rotor) remains "stationary" near the also stationary Copper coil (of the stator) -
the Protons of the Copper are forced into a linearly "stationary"
but magnetic accelerated Strong Force energy delivery and NO Eddy Current is displayed.

Below is a side view demonstration of a stationary Magnet near a stationary Copper Coil.
Since there is "NO Movement" - the magnetic (vertically aligned) direction of "flow"
of the static charge from the Aether - simply aligns in a "vertically stagnant / accelerated" delivery -
with the "stationary" accelerated magnetic field of the magnet and
NO "linearly relayed" Eddy Currents are displayed.



Below is a demonstration of the "Protons" and "Electron Functions"
of a "Stationary" Magnetic situation.




Below is a picture of a Magnetic rotor comprised of 12 individual Magnets
for creating an Electric Current.
All of the Magnets are situated around the rotor orienting
each Magnets North Pole outward.




Below is a picture of the "aligned" Magnetic directed flow
of the Universal Static Grid moving into the Magnets -





Below is a demonstration of how the Magnets "temporarily" align (Magnetize)
the Strong Force energy delivery to the Protons of the Copper coil -
every time a Magnet comes into close proximity to the coil
as the rotor rotates.
As each individual Magnet "passes" by the coil -
it "temporarily" forces the "aligned" (Magnetic) Strong Force energy delivery
to the Protons of the coil - which is "passed" (conducted / relayed)
from Proton - to - Proton (Electron Function - to - Electron Function)
to a conductor wire connected to the Coil to send the Electric Current to your house.



Below is the same above demonstration - only faster.




As seen in the above demonstrations - since a magnet must be in "motion" to create
Eddy Currents - this causes a temporary (quick) "gap" between the magnets being
in proximity to the Copper Coil as the rotor rotates. It is this necessary "gap" between
the magnets - which allows the Normal Gravitational delivery of the Strong Force Energy
to be delivered to the Protons/Atoms of the Copper Coil in the "Time gap" between magnets.
(During the "gaps" - the Magnetic Field around the Copper Coil "disappears" - because for
that quick instant - the Aether is taking over delivering the Strong Force Energy to the
Protons/Atoms of the Copper Coil = Normal Gravitational.)
These NECESSARY "gaps" are what cause AC (Alternating) Electric Currents to have "CYCLES" -
which is how AC Electric Currents are measured - by the "frequency" at which the
Eddy Current "pulses" occur on either side of the "gaps".



*ELECTRIC CURRENTS*

When this "aligned" (magnetic) "breaching" of the Law of Conservation of Energy
(Eddy Currents) is "sustained" at a particular "level" - this creates the "Electric Current".
The Electric Current is "conducted" along a Copper "wire" away from the Copper coil
to be used to do work (Electric Motors / etc.)
However - as the Electric Current is "conducted" through the Copper wire -
it must first meet (substitute) the Strong Force energy DEMANDS for a
portion of the atoms / Protons of the Copper WIRE itself -
which this situation IS also the reason for the Law of Conservation of Energy
on a wire conducting an Electric Current.
As the Electric Current supplies the Strong Force energy demands of
a portion of the atoms / Protons of the Copper wire -
this creates a MAGNETIC FIELD around the Copper wire
because the surrounding normal (gravitational) Universal Static Grid is forced to be
"accelerated" (siphon acceleration of gravity).
Furthermore - the magnetic field
(which is merely the "accelerated gravitational flow of the Universal Static Grid")
also creates a "static electric pressure" around the mass that is creating the magnetic field.
For a conducted electric current for example - it is this "static electric pressure"
(magnetic field)
which also helps "contain" the electric current within the
atoms / Protons of the conducting "wire".
(A natural magnet creates a magnetic field "naturally" -
but it does NOT "breach" the Law of Conservation of Energy as it does so.)


Below is a demonstration of how an Electric Current "substitutes" itself for being the source
for the Strong Force energy delivery - instead of the complete / absolute source being the
Universal Static Grid.
The Electric Current must FIRST meet (be the "substitute") for the Strong Force energy
demands for a proportionate number of the Atoms / Protons of the wire itself
(Law of Conservation of Energy)
which CREATES the Magnetic Field
(linear acceleration in the spherically/radial "normal" gravitational speed penetration)
around the wire.
Then - any "excess" energy above the Law of Conservation of Energy is conducted to do work.




Below is a demonstration for only the Law of Conservation of Energy in the Copper wire
which is energized with an Electric Current.
For each Proton that the Electric Current encounters -
it must suffice the Strong Force energy demand (Electron Functions)
of each Proton (that the accelerated Magnetic Field is NOT supplying)
before it can move onto the next Proton in the wire -
which is why there is a slight loss of energy
just for the Electric Current to energize the wire itself.




Below is a demonstration showing why the "cycling" of an
AC electric current through a conductor gives the "illusion"
that the Electrons are "traveling" or "moving" backwards
or against the direction of flow (conduction) of the current.
This "illusion" is created by the "switching" of the direction
from which the Atoms (Protons) of the wire are receiving their
Strong Force energy delivery (Electron Functions).
When the Electric Current pulses a "cycle" - this invokes
the Law of Conservation of Energy to occur - as the current
must first "substitute" the normal (Gravitational) Strong Force
energy delivery to a proportionate number of the Atoms (Protons)
of the conductor (wire).
(Which this creates the Magnetic Field -
linear acceleration in the normal gravitational USG around the wire -
IE = "static siphon acceleration" around the wire in the direction of the current)
Then - between "cycled pulses" - the USG quickly "decelerates"
to supply the Strong Force energy delivery (Normal Gravitational speed)
Electron Functions until the next "cycled pulse" is sent.
This repeating "sequence" occurs at the speed of light -
which is why it is difficult to detect - and merely gives the "illusion"
that the Electrons are actually "moving" against the flow of the current.




The below demonstration is the same as the above demonstration - only faster.





ELECTRIC TRANSFORMERS

An Electric Transformer is what converts AC (Alternating Current) into DC (Direct Current)
The Electric Current coming into your house is High Voltage AC. It supplies your outlets
which you plug your appliances into (radios / computers / vacuum cleaner / etc.)
However, inside each appliance is a "Transformer" to convert the High Voltage AC input -
into smaller amounts of DC currents for all of the different - smaller components
comprising the inner electric workings of each component of the "appliance".
Transformers come in many shapes and sizes - depending on the particular situation.

Below is a picture of a Transformer.






All Transformers have 2 - separate - wound coils of copper wire.
A "Primary Coil" - and a "Secondary Coil".
The copper wires (windings) of the individual Coils do NOT actually touch each other.
The two individual Coils are separated by a thin layer of insulating cardboard or fiberboard.

Below is a picture of the Two (2) Coils comprising a Transformer.
(Each "Coil" is made of a single strand of wire that is of a particular size-
and is wrapped very neatly into "circles" - forming the 2 individual "Coils of wire".)





The Primary Coil is connected to the wire you plug into the electrical receptacle in the wall.
The Secondary Coil is what powers the different internal electrical components inside any appliance.
When the "Primary Coil" is "energized" with High Voltage AC -
the "current" flows through the Primary Coil of hundreds of "circles" - around and around -
the windings of the coils of wire - and a powerful "Magnetic Field" is produced from
the AC current making these "circles".
The Iron "Core" which holds the two individual Copper Coils in place is "Magnetic"
and "assists / directs" the "acceleration" (Magnetic Field = siphon of the Aether static charge)
from the Primary Coil - to - the Secondary Coil.
As the Aether of static charge around the Primary Coil becomes "siphon accelerated"
(Magnetic Field) with - rotation - spherically/radial around the Primary Coil -
the "accelerated / rotating area" (Magnetic Field) also "encompasses" the Secondary Coil -
causing the Atoms / Protons of the Secondary Coil to become "siphon accelerated"
and the Secondary Coil produces Eddy Currents (Electric Currents) -
The number of "wraps" (individual wound circles) in the Secondary Coil -
determines how much "DC current" the Secondary Coil produces -
as compared to the size of the "Magnetic Field" created by the Primary (AC) Coil.
Transformer Coils are purposely designed with a particular "size" of a "Primary Coil" -
and a particular "size" of a "Secondary Coil" - so the "Secondary Coil" performs with a
particular amount of DC Electric Current for the desired application.

Below is a side view demonstration of the AC Current "energizing" the Primary Coil.



Below is a side view demonstration of the "Magnetic Field" (accelerated Aether siphon)
created by the AC Current "energizing" the Primary Coil.



Below is a side view demonstration of the DC Current being "created" by the
"accelerated Aether siphon" (Magnetic Field)
occurring around - and into - the Secondary Coil.



Below is a side view demonstration of the Transformer in action.



The AC Current "cycles" (one after the other) 60 times a second = "60 cycles"
through the Primary Coil.
However - the Secondary Coil will display a proportionately powerful -
but much more "steady" "current" - (like a battery) which is why it is termed
a (DC) "Direct" Current - instead of an AC - "Alternating" (60 cycle) Current.


DC Batteries

DC Batteries are merely causing linear acceleration in gravity.
The Positive (+) cells of a battery are comprised of "more dense" elemental components.
(Particular number of Atomic / Proton and EF Shell structures)
The Negative (-) cells of a battery are comprised of "less dense" elemental components.
(Particular number of Atomic / Proton and EF Shell structures)
The more dense elemental "cells" (Positive +) force gravity to accelerate "through"
the less dense elemental "cells" (Negative -) - and into the more dense (Positive +) "cells".
The "elemental components" separating the Positive (+) and Negative (-) components
within the battery - will only "allow" conduction (the acceleration of gravity) to occur -
through this semi-conductive "elemental barrier" itself -
in a "one way direction" through the entire batteries "engineered structure"
from the Negative (-) cells and - into the Positive (+) cells-
However-
The "conduction" ONLY occurs when the terminals are connected.
The "Electric Current" in the "wire" - is merely the "CONSTRICTED PATH"
at which the "accelerated gravity" is forced to "follow" = which IS - "CONDUCTION".


If "ANY" Electric Current is "cycling" (pulsing / conducting) to quickly
for the Law of Conservation of Energy to occur in the type and size
of the element (Copper wire) for the speed at which the Electric Current
needs to be conducted - the Electron Functions of the Protons
of the wire will "temporarily fail" to occur -
and the electromagnetic bond of the GNR "entities" "fails" for a microsecond -
and the GNR "entities" begin to "separate" -
which this separation causes the thermodynamics (heat)
to occur at the particular location of the "failure".
This is where the wire melts into a "glob" of Copper before the Universal Static Grid
can almost instantly "step in" and replenish the Strong Force energy
to re-bond the GNR "entities" back into solid Protons of a melted "glob" of Copper.
However - in the instant between the Law of Conservation of Energy / Electron Function failure -
and when the Universal Static Grid can "step in" (Gravity) and re-form each affected Proton -
the Copper Protons loose their previous "form" of a "wire" -
and simply reform into a "glob" of melted Copper.


The below demonstration shows that when an energy source
(Electric Current) is substituting the Strong Force energy supply
to a Proton - but it is "cycling" too "fast" for
the Law of Conservation of Energy to occur.
This causes the energy (electric current) to fail to supply
the Proton with its necessary Electron Function -
and the GNR "entities" begin to "separate" -
for a microsecond until the Universal Static Grid can "step in"
and take over with "Normal Gravitational" Strong Force energy delivery.
(The Universal Static Grid is the Natural - "Main Energy Source"
for the Strong Force for all Protons of all Mass.
Any "substituted" energy source is like a "back up" energy supply -
and if the back up supply should "fail" -
the Universal Static Grid instantly steps back in
to take over being the energy source again.



The above explanation is best demonstrated with the “act”
of welding metal with an electric arc welder. The amount
of electric current sent through the welding rod is more than
sufficient to not only meet the Strong Force Energy demands
of the atoms comprising the Mass of the welding rod -
(which is the Law of Conservation of Energy – which invokes
an automatic magnetic field around the welding rod) –
but there is an excessive amount of electric current purposely
applied to the rod to “breach” the Law of Conservation of Energy -
so that when the electric current flowing into the welding rod is
“grounded” – (or allowed to flow completely “through” the
welding rod and complete the electric circuit) –
the Law of Conservation of Energy is excessively breached
to the point of where the “aligned”
(magnetic situation – created by the flow of the electric current)
causes the Electron Functions of the welding rod to “fail” to occur
at the point of “grounding”.
This causes the electromagnetic bond of the GNR “entities” (particles)
of the Atoms (Protons) of the welding rod to “fail” and the GNR “entities”
instantaneously “separate” at the point of “grounding”.
The “separation” of the GNR “entities” results with continuous
backlashes in the surrounding (gravitational) USG – which is displayed
as thermodynamics (heat) and Photons (light).
The Strong Force Energy delivery “failure” occurs to more and more
of the atoms of the welding rod AND the metal being welded –
the separated GNR “entities” of both the welding rod AND
the metal being welded – are “temporarily” (instantaneously) “free”
to “mingle” – until the movement of the “disturbance” (the point of grounding)
moves away from a particular location on the metal being welded.
Then the USG (normal - gravitational Strong Force Energy delivery)
immediately “steps in” and unites the “separated” GNR “entities” into
a “new” / “solid” form of metal / Mass.
This continuous / repetitive "action" occurs at the speed of light -
for any duration that the electric circuit is "arcing" / "grounding".


Previous Next

Home 1 2 3 4 5 6 7 8 9 10 10-A 11 12 13 14 15 16 17 18 19 20 21

customaudioproduct@centurylink.net